NVidia Drivers in Mythbuntu 8.10

I've just discovered a brilliant tool.

Here's what happened. I was bored and my MythTv box didn't have any upcoming recordings for a few days so i thought it was a good time to upgrade to the latest version, MythBuntu 8.10. The update went well... except for the NVidia drivers. On reboot I kept getting a message saying that Ubuntu was running in "Low graphics mode". First thing I tried was going to "Hardware Drivers" to activate the restricted NVidia drivers. I selected the recommended version, click Activate and put in my password. It seems to go ok till I noticed that it still said "This driver is not activated". I did some research and tried re-installing jockey - no luck. I uninstall everything NVidia related in the package manager and re-installed - still no luck.

Here's where my discovery comes in, I found this forum (http://ubuntuforums.org/showthread.php?t=281358) which mentioned envy. I then went to the site here http://albertomilone.com/envyngfaq.html#A and installed. It worked brilliantly. I've just run it and rebooted and I have the restricted drivers loaded.

I wish I found Envy about 3 hours ago.

Comments

Cam said…
Just a quick note... I install some updates a while back for the NVidia drivers - it failed. If this happens just update envy and run it again.
8 February 2009 at 17:28
zanebabe said…
Terms of Service, verify I am 21+ years old, my registration data is accurate, and I’m prohibited from allowing anybody else to access my 우리카지노 account. PLAYSTUDIOS is dedicated to facilitating the accessibility and usability of its web site, playstudios.com, for everybody. PLAYSTUDIOS aims to comply with all applicable standards, together with the World Wide Web Consortium's Web Content Accessibility Guidelines 2.0 up to as} Level AA (WCAG 2.0 AA). PLAYSTUDIOS is pleased with the efforts that we have completed and may be} in-progress to ensure that|to ensure that} our web site is accessible to everyone. For instance, if 3 pm proved essentially the most successful during the testing period, a participant would double or triple wagers for a set time frame at 3 pm. The above system takes benefit of the short terms developments inside the payment schedule by maximizing the wins when the development is nice and minimizing losses when a development is unhealthy.
9 November 2022 at 16:07
Post a Comment

Popular posts from this blog

Using Homebridge and Broadlink RM Mini to automate

Image
In this post, I'll be documenting how I configured a Broadlink RM Mini to work with HomeKit using the Homebridge server I built in my last post . The Broadlink RM Mini is a small IR Blaster that sits on the coffee table and sends IR signals when requested. They're cheap, and they work: In hindsight, for a little more you can also get the RM Pro which (I found out later) includes a thermometer. I added a DS18D20 thermometer to my Raspberry Pi to get around this mess up. To start with, you'll need to unpack your RM Mini and get it setup on your network. To do this, you'll need to download their "e-Control" app and follow through the setup. There's a good summary of these steps here: https://spectrum.co.ae/blogs/technology/how-to-configure-broadlink-devices, you can just stop before step 5 if you don't plan to use the e-Control application. Now we need to add homebridge-broadlink-rm to our Raspberry Pi. Connect to the pi console, SSH or local...
Read more

Using HomeBridge on a Raspberry Pi to control devices from HomeKit

Image
If you’ve got a selection of devices that you’d like to control using iOS HomeKit, setting up homebridge might be a good solution. In short, it’s a platform which acts as a “bridge” between your devices and “HomeKit”. There are MANY plugins available for it: https://www.npmjs.com/search?q=homebridge. Here’s how I use it: I have a Broadlink RM Mini that controls my AC, TV, Radio and a digital photo frame using homebridge-broadlink-rm: https://www.npmjs.com/package/homebridge-broadlink-rm  I have it enable/disable an indoor camera using MotionEye using homebridge-script2: https://www.npmjs.com/package/homebridge-script2  With all those plugins, the options are almost endless if the device is connected to the network. To do this I use a Raspberry Pi 2. To get started, you’ll need to have raspbian installed and running. To do this, there are various guides available, including this official one: https://projects.raspberrypi.org/en/projects/raspberry-pi-getting-started. ...
Read more

LetsEncrypt and AWS ELB Load Balancers

Image
This is something that I've struggled to find good information on. You've setup your IIS Web Servers in AWS, get them working nicely behind an ELB Load Balancer, now you want to apply a free LetsEncrypt SSL Certificate. This guide will take you through that process. Here's he basic run down: Design your Infrastructure to allow for a Central Validation Server Setup and IAM identity with access to manage your certificates Setup an initial certificate Apply the new certificate to a new ELB Re-generate the LetsEncrypt Certificate with a script to automatically update the ELB Certificate Design your Infrastructure to allow for a Central Validation Server One concept discussed in LetsEncrypt's Integration Guide  is a Central Validation Server. To abbreviate this considerably, this is setting up one of the servers to manage the certificates. Fortunately ELB2 presents the certificate to clients and it doesn't matter which certificate is presented by the server....
Read more